Skip to content

VPNBeginner’s Complete Guide: How to Get Started After Your First Subscription

Follow each step, from payment and subscription access to app setup, server selection, and checking international access.

This VPN beginner’s guide covers the essentials: after subscribing, import the link from your account into a compatible app, choose a server, connect, and check that websites load and your apparent location matches expectations. Payment, a successful import, and a working connection are separate steps—a green status icon alone doesn’t confirm everything is set up.

You don’t need to study every protocol or keep changing advanced settings on day one. Check things in this order: account access → complete configuration → app routing traffic → successful access. This usually makes problems easier to pinpoint. Menu names may vary by operating system and app version; follow the instructions in your account dashboard.

After payment, check your account and data

If you haven’t subscribed yet, compare the plans based on how often you expect to use the service. LeleVPN accepts Alipay, WeChat Pay, and USDT. You can create an account without an email address using a username and password. Keep your login details safe, then check your order in the dashboard rather than relying on the payment page’s redirect to confirm activation.

After payment, open the dashboard overview and check the plan name, available data, and order status. If your payment provider shows the payment as complete but the dashboard hasn’t updated, refresh the page and make sure you’re signed in to the account used for payment. Don’t pay again right away. If the details still don’t match, submit your order information through a support ticket for review.

Monthly subscriptions and data packs work differently. Monthly data resets on the activation date each month, not at the start of the calendar month. Data packs last until used and never expire. If you upgrade a monthly subscription partway through its term, the price difference is converted into remaining days. Check which type you bought so you don’t mistake a reset date for a connection problem.

Find your subscription link and install a compatible app

A subscription link isn’t a login page or an ordinary webpage for a specific server. It lets an app retrieve server settings and usually contains access credentials. Your account password is for signing in to the dashboard; the subscription link is for importing settings. Don’t confuse the two. Copy the link using the dashboard’s copy option instead of reconstructing it from a screenshot or chat message.

Next, visit the downloads page in your dashboard, choose an app for your operating system, and follow its instructions. LeleVPN supports Windows, macOS, iOS, Android, and Linux, but installation, system permissions, and traffic routing differ between platforms. Don’t follow screenshots for a different platform step by step.

  • Windows and macOS: After installation, make sure the app opens correctly, then follow the guide to enable the system proxy or virtual network adapter mode. Simply launching the app doesn’t mean it’s handling your system traffic.
  • iOS and Android: The first time you connect, your device may ask for permission to add a VPN configuration or establish a VPN connection. Check which app is making the request before granting permission. On Android, if the connection drops when the screen locks, check background activity and battery settings.
  • Linux: Install the app according to your distribution and its instructions. Check that the service is running and the required permissions are in place. Don’t reuse commands intended for another distribution or run scripts from unknown sources just to save time.

App compatibility depends on whether it supports the configuration format and protocols in your subscription—not whether its name includes “VPN.” Shadowsocks, VMess, Trojan, and VLESS are different proxy protocols and aren’t interchangeable. An app that installs successfully may still be unable to parse your subscription. Use the import method specified in the dashboard guide, and don’t change server, port, or certificate settings yourself.

After importing your settings, follow these steps to connect for the first time

  1. Add the subscription. In the app, look for an option such as “Subscription,” “Configuration,” or “Import from URL.” Paste the full link and save it. If the dashboard provides a dedicated import button, make sure it opens the app you intended to use.
  2. Update the configuration. After importing, run an update. You should see servers or policy groups to choose from. Seeing a subscription name with no servers listed doesn’t mean the import succeeded.
  3. Choose a server to test. Start with a region that suits the website you want to use, and turn off any other proxy tools. First confirm that the connection works; compare server performance afterward.
  4. Route traffic through the app. Follow the platform guide to connect and enable the required system proxy or virtual network adapter mode. Virtual network adapter mode is often called TUN. It routes traffic from more apps through the client, but requires the right permissions and routing settings.
  5. Open the site you want to use. Check that it loads, lets you sign in, or supports the task you need to complete. The app’s connection status is just one checkpoint; verify the connection by using your actual destination.

If the app reports a format error during import, check that you pasted the complete subscription link and that it contains no extra spaces or line breaks. Make sure you chose subscription import, not manual entry for a single server. Some formats require a subscription type or conversion option specified in the dashboard. Don’t submit a link containing credentials to an unfamiliar conversion website.

Choosing a server and routing: start with your needs

Before choosing a region, check whether the service you want to use requires a particular location, then see how that server performs on your local network. A nearby location isn’t always faster, and a distant one isn’t necessarily unusable. LeleVPN offers 120+ countries and 190+ routes, providing a range of options—not a guarantee that every destination will be accessible. See the server list for available regions.

“Direct,” “relay,” and “IEPL dedicated line” mainly describe the traffic path. A direct route typically connects from your local network to an international gateway; a relay route passes through a forwarding node first; IEPL is a dedicated transmission method. Network topology and proxy protocol are different things, and a dedicated-line label alone doesn’t guarantee that a destination will accept the route. For details, see the guide to routes and protocols.

For your first connection, use the mode recommended in the guide. Rule-based mode routes traffic through the proxy or directly based on conditions such as domains and addresses, and is usually better suited to everyday mixed use. Global proxy mode tries to route traffic handled by the client through the proxy, but it doesn’t guarantee that every app is covered or that DNS is configured correctly. If an app ignores the system proxy, check its settings or use TUN mode as directed.

For day one: Start with the mode recommended in the guide and a server in a region that suits your destination. Test the site before trying another server or changing routing rules. Change one setting at a time; otherwise, even if the connection starts working again, it’s hard to tell what fixed it.

How to verify that your connection is working

Distinguish between “which route this request took” and “how all traffic on the device is routed.” Use an IP lookup to check the route used by your browser, then compare it with the selected server region in the app. In rule-based mode, the lookup page itself may use a direct connection, so the result applies only to that request and can’t by itself prove that the entire client is failing.

Next, check that the destination site loads fully and that its usual features work. If a website opens but an app doesn’t, the app may not be using the system proxy. If the page layout appears but images or video fail, check routing rules and connection errors for the relevant domains—not just whether the homepage loads.

DNS translates domain names into addresses. A DNS leak occurs when name lookups don’t follow the expected proxy or resolution path, potentially exposing them to a resolver you didn’t intend to use. Seeing an unfamiliar provider in a DNS test doesn’t automatically confirm a leak. Check the client’s remote DNS settings, encrypted DNS in your browser, and the active routing rules. Start with the DNS settings in the guide, and avoid enabling multiple conflicting configurations.

  • ✅ The account, plan, and available data in the dashboard match your order.
  • ✅ The app updates the subscription successfully and shows servers you can select.
  • ✅ System permissions are granted, and the connection mode matches the guide.
  • ✅ The website or app you want to use works—not just the connection icon.
  • ✅ You know which requests are routed through the proxy and have kept your login details and subscription link secure.

Troubleshoot by symptom

First identify which layer is causing the issue, then decide whether to change servers. Account access, subscription downloads, server connections, and a destination refusing access all require different fixes. Use the table below as a troubleshooting sequence for your first connection.

Use the symptom to find your next step
Symptom Check first Next step
No plan appears after payment Whether the signed-in account, order status, and payment record match Refresh the dashboard. If they still don’t match, submit a ticket with your order details instead of paying again.
Subscription won’t update Whether the link is complete, the app is compatible, and your current network can reach the subscription service Copy the link again and select the import type specified in the guide. Don’t edit server settings manually yet.
Servers appear, but none connect System permissions, other proxy tools, and any error shown by the app Close conflicting tools, check permissions, and test a different server for comparison.
The app says connected, but webpages won’t load Whether traffic is being routed, the routing rules, DNS, and the destination website’s status Test another website first, then check the system proxy or TUN settings using the guide.
The browser works, but one app doesn’t Whether the app follows the system proxy or has its own network settings Check the app’s proxy options, or verify virtual network adapter mode using the platform guide.
Connection drops when the screen locks or stops working after waking Background restrictions, battery settings, and connection status after switching networks Allow the necessary background activity, reconnect after waking, and check whether the issue occurs only on a particular network.

If only a particular streaming service or other region-specific service fails, the cause may be location detection, account region, or the platform’s own rules. Changing protocols may not help. A website loading doesn’t mean all of its content will be available; access depends on your current route and the platform’s rules.

To get help, use a support ticket in your dashboard. Include your operating system, app name, network environment, the issue you’re seeing, and the steps you’ve already tried. Share only the relevant error log, and check it for subscription links, tokens, or other credentials first. These details make troubleshooting easier than simply saying “it doesn’t work.”

After day one, keep the settings you can reuse

Once the connection is stable, note which server works, the current mode, and any permissions you needed. There’s no need to keep changing settings. Update the subscription if server details change. On a new device, repeat installation, import, and verification for its operating system—permissions don’t automatically sync from another device.

LeleVPN has no limit on the number of devices that can be connected at the same time, but that doesn’t give each device a separate data allowance. Keep an eye on your account’s data when using multiple devices, especially for video streaming, cloud syncing, and system updates. To reduce usage, first identify which tasks actually need the proxy, then adjust routing rules according to the guide instead of disabling important rules by guesswork.

You’re set when: Your account works, the subscription updates, your destination is accessible, and you know what to check if the connection drops or fails. That’s all you need for your first session. Compare servers and plans later based on how you actually use the service; it’s more practical than enabling every advanced setting on day one.

Get started free